Roofing Material Prices In 2024 – How Much Does a New Roof Cost?

Are you trying to figure out the prices of roofing materials?

Pricing for roofing material is often one of the last things you want to dissect because, usually, there is a lot to weigh and consider. Think about the last time you bought a car; you didn’t just pay for the price of the car; you had to consider everything attached to it.

The same applies to roofing materials. 

While it may not be as expensive as a car, it can get pricey depending on the type of material as some require more effort than others to install. Attention to detail is a must! 

Today, we will give you a rundown on roof material pricing and roofing costs!

 ➡️ See More: Roofing Frequently Asked Questions

What Price Variables should be known? 

Roofing materials are not their own separate costs but rather incur other variable costs that come with it, thus causing the price to vary. 

Such variables that your roofing contractor will use include but are not limited to, architectural design of the roof, home size, labor, necessary permits, and removal of roofing material if applicable. 

Labor costs, above all else, is something to be aware of, because, depending on your desired material for your roof, it may require more effort and expertise to install, thus driving up the per-square-foot labor rate. The average price range is $1.50 – $3.65 per square foot + expertise needed for the job. Labor rates do vary geographically but are generally the same regionally. 

Note:Roofing supply shortages have been impacted due to the ongoing COVID-19 Pandemic. Like every industry, selection, order timing, and prices have been negatively impacted. Normal levels of supply have started to bounce back at the end of 2022.

Roof Replacement Cost:

The average price of a roof replacement cost is based on per square foot. The average size of a roof is 2,000 to 3,000 total square feet. Using this number, the cost of roofing material for a roof replacement would be as follows:

Roofing Material	Price Range
Basic 3 Tab Shingles	$4,000 to $8,000
Architectural Shingles	$7,000 to $18,000
Standing seam metal roofs	$18,000 to $40,000
Ceader Shake Wood Shingles	$12,000 to $22,000
Slate Roof	$20,000 to $36,000
Clay Tiles	$25,000 to $45,000
Solar Shingles	$60,000 and up
Concrete Tiles	$12,000 to $22,000

**Prices will vary depending on the size of the roof and also the roofing material you ultimately decide to have installed. These prices above factor in labor costs and were generated using multiple sources and our own pricing procedures. For an estimate on your roofing material, reach out to Chuck and the Legacy Roofing team here.

Roofing Materials Prices in 2023 

Below you will find the different “Average” prices for the most common roofing materials in the industry. Keep in mind that the cost for installation continuously varies and depends on these factors:

1. The size of your roof
2. The type of shingle or material you select
3. The type of roof you have & the roof parts
4. Your location (rural vs. city, etc.).

That said, below the roof material pricing* will give you a general idea of national averages for roofing materials. Of course, these are subject to changes and depend on the abovementioned factors.

Shingle Prices 2023:

The following roofing material prices are based on a standard roof replacement for a 3,000-square-foot roof. This is simply a guide to give you rough estimates for new roof costs. The average cost of asphalt shingle roofs in the United States in 2023 is between $6,000 and $12,000.

1. Architectural Asphalt Shingles

Asphalt shingles are the most popular shingle in the United States. Virtually all homes have asphalt shingles. The roof replacement cost for asphalt shingles is less expensive, and they are still durable. Most homeowners will upgrade their shingles to architectural shingles if they have an existing asphalt shingle roof.

You can learn more about why architectural shingles are a better option here and the average cost below:

• Cost per square ft. = $4.00 to $7.00
• Cost per Square (100 sq. ft.)  = $400 to $700
• Cost for installation = $12,000 to $21,000

2. Asphalt Three-Tab Shingles 

Three-tab shingles are the typical builder-grade asphalt shingles your home is installed with. Installation costs are lower because the cost per square foot of 3-tab shingles are cheaper. They don’t offer nearly as much

• Cost per square ft. = $1.75 – $3.00
• Cost per Square (100 sq. ft.)  = $175-300
• Cost for installation = $6,000 to $10,000

3. Metal Shingles & Standing Seam Metal Roofing:

A standing seam metal roof is a popular choice for modern farm homes. However, they do cost a pretty penny which is why you will see the price per square foot varying so much:

• Cost per square ft. = $5.25 – $20.00+
• Cost per Square (100 sq. ft.)  = $300 to $3,000
• Cost for installation = $25,000 up to $50,000

➡️ Related: Metal Roof vs. Shingle Roof

4. Aluminum Shingles

Most homeowners will never purchase aluminum shingles for their entire roofing system. These are commonly used on barns, sheds, etc but in the case of aluminum shingles roof installation:

• Cost per square ft. = $3-$4
• Cost per Square (100 sq. ft.)  = $250-$400
• Cost for installation = $7,000 to $13,000

5. Slate Tiles 

Slate tiles are completely fire-resistant, which makes them a rare but excellent choice for some roof replacements. Slate tiles are on the more expensive side and similar to metal roofing in price:

• Cost per square ft. = $7.50 – $16
• Cost per Square (100 sq. ft.)  = $750 – $1,600
• Cost for installation = $21,000 to 32,000

6. Solar Shingles

Want to save on energy long term? Solar shingles are the most expensive item on this list, and the average cost of a solar shingle roof is going to be well over $60,000. However, if you are replacing your old roof with a new roof and you plan on staying at your location for a long time and want a more energy-efficient, solar shingles can be seen as a long-term investment with a huge ROI.

• Cost per square ft. = $23
• Cost per Square (100 sq. ft.)  = $2,300+
• Cost for installation = $60K +

7. Cedar Wood Shake

Wood shakes used to be popular, but because they are hard to install/replace and they need more care, they are less popular. Dimensional asphalt shingles also give the same curb appeal, which is why more homeowners are staying away from cedar shingles.

• Cost per square ft. = $6+
• Cost per Square (100 sq. ft.)  = $600+
• Cost for installation = $18,000+

Other Roofing Material Prices:

The roofing industry is similar to most industries – there are quite a few options. With so many different roofing materials, we tell homeowners that replacing their shingles with a modern update is your best bet to ensure a healthy roof.

In most cases, that means upgrading three-tab shingles to architectural shingles (also known as dimensional shingles). Adding slate roofs or standing seam metal roofs is super expensive, but they will last longer.

Other factors that determine roof replacement costs include:

• Ridge Vent – the ridge vent or shingle cap across the peak of your roof is measured per linear foot.
• Roof Decking – hopefully, you don’t have to replace the plywood roof decking, but if you do it is based on 8-foot sections. This isn’t known in most cases until you have your roof replaced and the old roof torn off.
• Flashing – anywhere a vent or wall (think chimney) sticks out of your roof requires flashing, which is also priced per linear foot.
• Vents – any new vent replacement is an add-on with roof replacements.
• Pipe Collars – new pipe collars are a roofing extra.
• Skylights – the best time to add natural light to your home is during the roof removal and replacement process. Skylight pricing can vary depending on the depth of the light.
• Gutters & Fascia—Some people will have new gutters installed along with their roof replacements. Gutters and fascia boards are replaced as needed, and it is a good idea to do it with your new roof.

Factors that determine the price of a new roof:

Like anything, roof shingles costs vary depending on several factors. When you plan on a roof replacement, is best to realize that the number one factor that will determine is the square footage of your home’s roof, followed by the shingles you select.

1. Size or your roof. Roofs are estimated by square feet. 100 square feet is equivalent to one square. The shingles and installation costs are all combined based on the number of squares required. A larger roof will have higher roof replacement costs. Your roof size matters the most.
2. Shingle types. After the size factor, the type of asphalt shingles you select can increase or decrease the cost of your new roof. Premium dimensional asphalt shingles will cost more than basic builder 3-tab shingles.
3. Labor costs. A reputable roofing company will build in labor costs to their square foot pricing. That said, if you get extras like skylights or need additional work, there can be labor costs.
4. Location of your home. Depending on where you live will determine the best asphalt shingles (or other roofing materials) for your home and also product availability.

How to Hire a Roofing Contractor?

Hiring a roofing contractor, like most services, can often be as easy as a quick google search in your area. However, the rule of thumb is to get roofing price quotes from a handful of roofing contractors to price match effectively. In your quotes, make sure all costs are factored in for accuracy!

You are aiming for an average margin of error of about $2K – $4K. 

Due your due diligence to ensure the company you are potentially reaching out to service your home are licensed professionals, posting testimony and reviews and before and after service photos to get a visual. These steps ensure proper quality control YOU can control! 

➡️ How to Find A Great Roofing Company Tips

Avoid Hidden Costs 

Nobody likes hidden costs, so doing your homework, as mentioned beforehand, is essential! For roofing contractors, this is where trust and transparency meet the road. You always what to ask yourself: 

1. Are they reliable? 
2. Check reviews, testimonies, and service photos. 
3. Are they credible? 
4. Validating local licensing, checking BBB, and verifying the business address 

Warning Signs 

If the company you potentially will patronize: 

1. Pressure you to enter a contract 
2. Are off the mark in terms of roofing price quotes 
3. Request unreasonably large cash deposits or the entire cost upfront  

Think again! Always use sound judgment to sift through potential companies for your home, but never feel like you are obligated to go in whichever direction. Remember, you are the buyer! 

How are roofs priced?

All roofs are estimated per square foot. Roofers will refer to 100 square feet as a “Square.” If you are replacing your roof and it needs 1,500 square feet – or 15 square – the roof cost would be 15 times the price per square.

The average price for a square can vary from $300 on the low end to $700 on the higher end for asphalt shingles. Metal roofs, slate roofing materials, and clay tiles can cost significantly more!

What’s the verdict?

Roofing prices from the outside look complex as there are different variables and factors to consider, making it challenging to judge cost; however, in the grand scheme of things, it’s basically like getting a car. 

You don’t just invest in it, but all the things that make it what you needed it to be in the first place. Always have a long-term mentality when considering weighing options. Be sure you are doing your due diligence in hiring reliable and credible roofing services that don’t have hidden costs. Transparency is a must! 

If you, like most people, find yourself in a position where you’re not sure how to navigate roofing prices, always feel free to reach out to a trusted, licensed professional for help.

At Legacy Roofing of Idaho, we want to bring real-life solutions to your problems!

FAQ:

How much do standing seam roofs cost?

Standing seam metal roofs cost more than asphalt shingles. However, they are one of the most durable roofing materials on the list. A new metal roof can cost well over $25,000 up to $40,000. Standing seam metal panels are sometimes used on a partial roof replacement or in certain places on a home, like a porch or addition.

Do I need a roof replacement or just some roof repairs?

Sometimes homeowners are not sure if they need to replace their old shingles or just get a roof repair. We believe in the 50/50 rule here at Legacy Roofing of Idaho. If your roof repair is going to cost more than 50% of a replacement – you should have it replaced. It also depends on your roof warranty (or lack thereof), and how much lifespan your current shingles have in them. Asphalt shingles are designed to last a certain about of time so the age of your roof will often determine if you need a new roof or now.

*Check out the pricing guide we used from Modernize Home Services here! Our prices for roofs vary and fall in line with averages, but you can find out our pricing here.